Oral-B Toothbrush Not Charging. Why Your Toothbrush Doesn’t Hold Charge?

Using an Oral B electric toothbrush has various advantages. Oral B claims that electric toothbrushes are 100 percent more effective than manual brushes at removing plaque due to the larger number of strokes per minute and the built-in timer. However, all of these benefits are rendered meaningless if the electric toothbrush does not keep a charge. So, what’s the deal with your Oral-B Toothbrush Not Charging?

Your oral-b toothbrush is not charging, and As a result, you’re in a difficult situation. You’re back to using a basic toothbrush. You paid good money now that your electric toothbrush’s battery has died. Understandably, this might be aggravating. But don’t toss the batter or the Oral-B just yet. Perhaps we can be of assistance. The following are some of the most common causes of your Oral-B not charging. You might be able to find a quick solution to your problem.

Is the charging light on or flashing on your toothbrush? There should be no discernible activity when you plug in the toothbrush to see if it’s charging. If it doesn’t, the toothbrush is either not charging properly or has a dead battery. If the charging light is working properly, please continue reading.

Is there any warmth coming from the charger or the bottom of the toothbrush after charging for an hour? After a few hours of charging, the charger or toothbrush will feel warm to the touch. Double-check that the charger is properly put into the electrical socket if you don’t feel any heat. Plug a light or another electrical gadget into the wall socket to see if it is alive and turned on. Try plugging the toothbrush charger into a working electrical outlet if this does not work.

Check the electrical socket and borrow a charger from a friend or family member who may have one on hand to see if you can get your toothbrush to operate again. You may also try out their toothbrush on your charger.

If you’ve decided that your charger is faulty, you can find a compatible replacement on Oral-B chargers or Philips Sonicare chargers sites. Otherwise, You can find instructions for repairing the toothbrush on the internet.

The Oral B electric toothbrush is built to withstand frequent use and other challenges. On rare occasions, the gadget’s electric interior may be compromised.

The printed circuit board may be destroyed if the toothbrush is soaked in water or dropped on a hard surface. PCB corrosion of copper wire breaking may cause the toothbrush’s induction motor to stop working, giving the impression that the battery is dead, even if power is stored in the battery.

Check the PCB and open the brush to see if it is broken and causing your charging issues. Any wires leading to the battery or motor could have cracks, burns, or corrosion that can be fixed using a soldering iron or replaced with a new PCB.

Another possible reason for your Oral B toothbrush not charging is the “memory effect.” Even though the manufacturer has yet to acknowledge or deny the existence of this phenomenon in toothbrushes, many people believe it is true.

To trigger the “memory effect,” You must fully charge a partially depleted battery. It just “remembers” how much power you initially put into it. Because the device now has less charge, it can no longer be charged further if done repeatedly.

This impact can be reversed if identified early enough. Wait until the battery is entirely exhausted before charging it fully.

Even if the PCB appears to be in good shape, the battery has likely deteriorated over time. If the toothbrush has been used for more than a couple of years and the battery has never been changed, the battery life may be diminished.

To change the battery, do the same thing you did to inspect the PCB: open the toothbrush. Rechargeable batteries are compatible with Oral B toothbrushes, so replace your old ones with one. A rechargeable battery requires soldering skills to be properly installed, making the replacement process more difficult than a standard throwaway battery swap.

• Before recharging, make sure you’ve used it all the way. In other words, don’t recharge the battery between uses because it may damage the battery and its charging ability.
• You’ve just plugged in your Oral B toothbrush, but the green charging indicator isn’t turning on right away. Maintain your cool before you become overwhelmed. Simply give it some time. If the battery in your toothbrush is entirely depleted when brushing, the light will not appear right away. It may take up to 15 minutes for the gadget to begin charging once the green light flickers.
• It is required to turn off these toothbrushes before they can charge. Even if it is turned on, charging it will not function. Regardless of how low the battery is, you should always turn off your phone before placing it on the charging base.
• When a battery reaches the end of its useful life, you must change it. It will ultimately stop working due to wear and tear. All you need to do is change the batteries in your toothbrush.
• A faulty charger is another probable cause of your Oral B toothbrush not charging. The only way to be certain is to test it with another charger. If it does, the charger in question is defective.